3.8V 4000mAh Honeywell EDA50 Replacement Battery
Product Overview
Premium 3.8V 4000mAh (15.20Wh) Li-ion replacement battery engineered for Honeywell devices. This high-quality long life pda battery delivers reliable power output and extended runtime. Built for demanding data collection, warehouse scanning, and field service operations with shift-long runtime. Dimensions: 78.3 × 58 × 8.1, weight: 126g. Features smart protection circuitry (overcharge, short circuit, over-discharge) for safe daily use. 100% compatible with original device specifications — drop-in installation, no modification required. CE/RoHS/UN38.3 certified healthcare pda battery backed by 12-15 months warranty.
Specifications
| Parameter | Specification |
| Voltage | 3.8V |
| Capacity | 4000mAh / 15.20Wh |
| Battery Type | Li-ion |
| Weight | 126g |
| Dimension | 78.3 × 58 × 8.1 mm |
| Cycle Life | 500+ cycles |
| Protection | PCM / Smart IC |
| Certification | CE / RoHS / UN38.3 |
| Warranty | 12 months |
Compatible Models / Replacement For
• Replacement for EDA50, 4000mAh
Designed as a form-factor and electrical match for Honeywell devices. Drop-in installation with no soldering or firmware modification required.
Performance Overview
Swap in this 3.8V 4000mAh replacement to regain 15.20Wh of operational capacity. The rugged Li-ion construction handles warehouse temperatures and field service conditions.
Li-ion cell architecture prioritizes charge retention and discharge stability. The pack measures 78.3 × 58 × 8.1 mm, 126g and integrates with Honeywell equipment specifications.
Dimensional accuracy to 78.3 × 58 × 8.1 mm guarantees proper fitment in Honeywell devices. The battery profile matches original specifications for hassle-free installation.
Installation & First Use
• Install by removing the battery compartment cover on your Honeywell PDA, taking out the existing battery, and inserting this replacement with correct polarity. Ensure the battery makes firm contact with the terminals.
• For optimal performance, use the Honeywell original charger or a compatible 4000mAh charger. Complete the first charge cycle fully, then perform 2-3 charge-discharge cycles to activate the battery's full capacity.
Technical Specifications
• Energy density: approximately 121 Wh/kg (standard energy density for Li-ion cells in this form factor)
• Estimated charging time: 4.0h 0m at standard 1C rate via compatible charger
• Power capacity: 15.20Wh — compact energy rating suitable for personal electronics and portable devices
• Packed volume: 36.8 cm³ — designed to match OEM compartment dimensions for Honeywell devices
• Net weight: 126g with 78.3 × 58 × 8.1 mm footprint — form factor optimized for pda integration
• Operating temperature range: -20°C to 60°C with capacity retention above 80% at -10°C for cold-chain logistics applications
• Cell configuration: 1-series Li-ion pack at 3.8V nominal with individual cell monitoring for balanced charging and discharge
All batteries are manufactured in our SGS-certified facility with CE, RoHS, UN38.3 compliance and 100% capacity testing before shipment. Contact us for detailed factory qualifications and OEM customization options.
Industrial-Grade Honeywell EDA50 Replacement Battery
Industrial Environment Performance
• Wide operating temperature range from -20℃ to 60℃ for cold storage and hot warehouses
• Drop resistance design for field operations and rough handling
• Vibration tolerance for forklift and vehicle-mounted applications
• IP-rated protection against dust and moisture in industrial settings
Shift-Long Runtime Assurance
• 8-12 hours continuous operation for single-shift workflows
• Fast swap capability for multi-shift operations without charging delay
• Multi-shift charging support with quick charge capability
• Battery level indicators for shift planning and power management
Certified for Critical Applications
• Healthcare compliant for patient data collection and medical inventory
• Logistics certified for warehouse and supply chain management
• Retail validated for inventory tracking and point-of-sale integration
• Field service approved for outdoor and remote operation scenarios
B2B Quick Facts
• Wide temperature range tested
• Drop-resistant construction
• Sample orders welcome — contact for free sample and datasheet
• MOQ: negotiable, sample and small-batch trial orders accepted
Your Trusted PDA Battery Supplier
• Industrial-grade battery solutions for Zebra, Honeywell, Datalogic, and Intermec devices
• Rugged construction tested for warehouse, field service, and cold-chain environments
• Shift-long runtime assurance — 8-12 hours continuous operation with hot-swap capability
Why Choose Our PDA Battery Factory?
• SGS certified production
• Worldwide shipping support
• Responsive technical team
Request a quote for For Honeywell EDA50 batteries — we provide samples, datasheets, and customized solutions.
Frequently Asked Questions
Q1: Is this 3.8V 4000mAh battery compatible with Zebra, Honeywell, and Datalogic PDAs?
A: Verify compatibility by checking voltage (3.8V), capacity (4000mAh), and physical dimensions ( (78.3 × 58 × 8.1 mm) mm). This battery is designed for Honeywell devices; cross-compatibility varies by model.
Q2: Can I perform hot battery swaps during multi-shift operations with this 4000mAh battery?
A: Yes, designed for quick battery swaps. Keep spare batteries charged and ready. Most Honeywell PDAs retain memory for short periods during battery changes, minimizing data loss.
Q3: Is this 3.8V battery drop-resistant for field operations?
A: Yes, features reinforced casing for drop resistance. However, avoid physical impacts when possible. The internal construction is designed to withstand typical field handling and warehouse environments.
Q4: What charging method is recommended for this 4000mAh PDA battery?
A: Use the original Honeywell charging cradle or compatible 4000mAh charger. Avoid cheap third-party chargers that may damage the BMS. Charge at room temperature for best results.


Camera battery

