inquiry
Leave Your Message
CE, FCC, RoHS, UN38.3: B2B Guide to Battery Safety Certifications
Industry Information
News Categories
Featured News

CE, FCC, RoHS, UN38.3: B2B Guide to Battery Safety Certifications

2026-06-16

Every replacement battery sold in international markets carries (or should carry) a set of certification marks that indicate compliance with safety, environmental, and performance standards. For B2B procurement professionals, understanding what each mark means, which ones apply to their market, and how to verify them is essential for regulatory compliance and liability protection. This guide provides a practical reference for evaluating battery certifications.

CE marking indicates conformity with European Union health, safety, and environmental requirements. For batteries, the applicable directives include the Low Voltage Directive (LVD, 2014/35/EU), the EMC Directive (2014/30/EU), and the Battery Regulation (2023/1542, replacing the earlier Battery Directive). CE marking is self-declared by the manufacturer, meaning no independent testing body is required by law. However, a Technical File must exist and be available for EU market surveillance authorities upon request. B2B buyers should request the Declaration of Conformity (DoC) and verify it lists the applicable directives.

FCC marking is mandatory for batteries containing active circuitry (such as BMS boards with wireless or RF components) sold in the United States. Part 15 of FCC rules covers unintentional emissions. A battery pack's BMS typically operates below the frequency threshold requiring testing, but if the terminal device includes wireless charging or NFC components integrated with the battery, FCC compliance applies. The FCC ID or SDoC (Supplier's Declaration of Conformity) should be visible on the product or available from the manufacturer.

RoHS (Restriction of Hazardous Substances) compliance limits six substances: lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE. For lithium batteries, the primary concern is lead content in solder joints and cadmium in electrode materials. The current RoHS 3 directive (2011/65/EU + amendments) adds four phthalates. Compliance is verified via a test report from an accredited laboratory such as SGS, TÜV Rheinland, or Bureau Veritas.

UN38.3 is not a market access mark per se but a transport safety requirement. Without a valid UN38.3 test summary, air carriers and freight forwarders will refuse shipment. The test must be repeated whenever the cell chemistry, design, or manufacturing process changes significantly. Test summaries older than 12 months may be rejected by some carriers. For end users: if a battery does not carry UN38.3 documentation, it is either counterfeit or shipped through non-compliant channels. B2B buyers should never accept a "compliance certificate" in lieu of the actual UN38.3 test summary document.